I’ve used this Putting Station for years and had always planned on writing a blog post about it so here we go. First here’s a picture of the station:
Improve your Putting
Here’s how to set this up. If you don’t have one, go down to Home Depot or Lowes or any hardware store and get yourself a chalk line and some chalk. That is what I used to create the red line on the ground. You can snap a line for a straight putt or a braking putt but it’s best for this station to use a straight putt. The two tees by the ball create a gate for the stroke to keep your contact in line with the sweetspot and helps to reinforce good aim. They should be positioned just outside the toe and heel of your putter. Line on the putter and line on the ground should over lap. Make sure there is line showing beyond the back edge of the putter( it makes it much easier to line up that way). If you don’t use a line, intersect the line with the leading edge of your putter. One thing this picture does not show is the putter. The putter and ball should begin even with the first set of tees. So, at address, the putter is right between the gate with the ball just in front of that. The picture above is just of the tools needed for the putting station and not an accurate depiction of where the ball should go.
The other two tees a few inches in front are just beyond the width of a golf ball straddling the line. These tees should be quite close to the width of the ball. These tees are used to test your face angle control. Only putts starting exactly on the line with a square face will propel the ball through the gate and on its way.
Work on this station for putts within 6 feet. It can be used beyond that but I don’t recommend it. You want to practice makes and distance control. This station should be set-up in a way that every ball that gets through the second gate with decent speed goes in.
This will really show you how well you are managing the face of the putter. That’s where the money is made.
FACE and PACE.
Related posts:
